SUB-ZERO ICE MAKER · ALAMEDA
Sub-Zero ice maker not working in Alameda? We fix it.
A Sub-Zero ice maker that quits is rarely the whole unit. On these built-ins and columns the problem is almost always one part in the water path or one component in the ice-maker module, and it is worth fixing right. We run Sub-Zero refrigeration every week and know which part to pull first.
We handle Sub-Zero ice maker not working repairs across Alameda, from Gold Coast, Park Street, Bay Farm Island to the surrounding neighborhoods.
We cover Alameda from our San Ramon base (Inner East Bay). Here is the short version; the full guide is on the Sub-Zero Ice Maker Not Working page.
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
Why this happens
What we look for first.
- Water inlet valve failed or clogged. The inlet valve sits at the back of the cabinet and opens to feed water to the ice mold on each cycle. The solenoid weakens, the screen behind it scales up with mineral, or the valve sticks closed, and the mold never fills. No fill means no ice even though the module keeps cycling and ejecting empty. We meter the solenoid for coil resistance, check for voltage at the valve during a fill call, and verify line pressure before we condemn it. A bad valve is one of the most common no-ice causes on these units.
- Frozen fill tube. Water dribbles into the back of the mold through a small plastic fill tube. If the valve weeps, or the mold runs too cold, that last bit of water freezes in the tube and caps it off. Next cycle the water has nowhere to go, so it backs up or spills, and ice production stops. The tell is a small ice plug right where the tube meets the mold. We thaw the tube, find why it froze, and fix the root cause, usually a weeping valve, so it does not come right back.
Full causes and diagnostic steps: Sub-Zero Ice Maker Not Working.
Serving Alameda
Alameda: response and coverage.
Alameda sits in our Inner East Bay zone, paired with our Oakland route. Same-week scheduling, often Tuesday or Thursday block days.
Neighborhoods we cover regularly in Alameda: Gold Coast, Park Street, Bay Farm Island. Beyond those, our service area in Alameda covers the city limits.
Most Alameda kitchens run everyday brands: GE, LG, Samsung, Whirlpool, and KitchenAid across the island's mid-century and Victorian homes.
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Typical
Repair pricing is provided in a written estimate after the $99 on-site diagnosis, which is credited toward the repair.
-
Warranty
You get a parts and labor warranty in writing before we start: from 3 months to 2 years depending on the type of repair. Standard repairs carry 3 months on parts and labor, inverter boards 1 year, and a full sealed-system rebuild 2 years. We put the part, the price, and the labor on the quote before we touch the machine, so you know exactly what is covered.
Related
More on Sub-Zero and Alameda.
Nearby cities
Sub-Zero ice maker not working near Alameda.
Also in Alameda
Other ice maker repairs we do in Alameda.
Ready to book the Alameda call?