SUB-ZERO ICE MAKER · BURLINGAME

Sub-Zero ice maker not working in Burlingame? We fix it.

A Sub-Zero ice maker that quits is rarely the whole unit. On these built-ins and columns the problem is almost always one part in the water path or one component in the ice-maker module, and it is worth fixing right. We run Sub-Zero refrigeration every week and know which part to pull first.

We handle Sub-Zero ice maker not working repairs across Burlingame, from Burlingame Ave, Easton Addition, Lyon Hoag to the surrounding neighborhoods.

We cover Burlingame with our San Mateo County technician (Mid-Peninsula). Here is the short version; the full guide is on the Sub-Zero Ice Maker Not Working page.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Why this happens

What we look for first.

Water inlet valve failed or clogged. The inlet valve sits at the back of the cabinet and opens to feed water to the ice mold on each cycle. The solenoid weakens, the screen behind it scales up with mineral, or the valve sticks closed, and the mold never fills. No fill means no ice even though the module keeps cycling and ejecting empty. We meter the solenoid for coil resistance, check for voltage at the valve during a fill call, and verify line pressure before we condemn it. A bad valve is one of the most common no-ice causes on these units.
Frozen fill tube. Water dribbles into the back of the mold through a small plastic fill tube. If the valve weeps, or the mold runs too cold, that last bit of water freezes in the tube and caps it off. Next cycle the water has nowhere to go, so it backs up or spills, and ice production stops. The tell is a small ice plug right where the tube meets the mold. We thaw the tube, find why it froze, and fix the root cause, usually a weeping valve, so it does not come right back.

Full causes and diagnostic steps: Sub-Zero Ice Maker Not Working.

Serving Burlingame

Burlingame: response and coverage.

Burlingame is close to our San Mateo base, and our Peninsula technician works it as part of the regular route through Easton Addition, Lyon Hoag, and the Burlingame Avenue area. We schedule by appointment rather than guaranteeing same-day service.

Neighborhoods we cover regularly in Burlingame: Burlingame Ave, Easton Addition, Lyon Hoag. Beyond those, our service area in Burlingame covers the city limits.

Burlingame kitchens skew a little more affluent, with GE Profile, Whirlpool, Samsung, LG, and KitchenAid in the flats around Burlingame Ave and the Broadway shopping district, and larger builds up in the hills carrying the same everyday brands at a bigger scale.

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Typical

Repair pricing is provided in a written estimate after the $99 on-site diagnosis, which is credited toward the repair.
Warranty

You get a parts and labor warranty in writing before we start: from 3 months to 2 years depending on the type of repair. Standard repairs carry 3 months on parts and labor, inverter boards 1 year, and a full sealed-system rebuild 2 years. We put the part, the price, and the labor on the quote before we touch the machine, so you know exactly what is covered.

Nearby cities

Sub-Zero ice maker not working near Burlingame.

Also in Burlingame

Other ice maker repairs we do in Burlingame.

Ready to book the Burlingame call?

Tell us the model and the symptom. We will quote it.