SUB-ZERO ICE MAKER · REDWOOD CITY
Sub-Zero ice maker not working in Redwood City? We fix it.
A Sub-Zero ice maker that quits is rarely the whole unit. On these built-ins and columns the problem is almost always one part in the water path or one component in the ice-maker module, and it is worth fixing right. We run Sub-Zero refrigeration every week and know which part to pull first.
We handle Sub-Zero ice maker not working repairs across Redwood City, from Emerald Hills, Redwood Shores, Woodside Plaza to the surrounding neighborhoods.
We cover Redwood City with our San Mateo County technician (Mid-Peninsula). Here is the short version; the full guide is on the Sub-Zero Ice Maker Not Working page.
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
Why this happens
What we look for first.
- Water inlet valve failed or clogged. The inlet valve sits at the back of the cabinet and opens to feed water to the ice mold on each cycle. The solenoid weakens, the screen behind it scales up with mineral, or the valve sticks closed, and the mold never fills. No fill means no ice even though the module keeps cycling and ejecting empty. We meter the solenoid for coil resistance, check for voltage at the valve during a fill call, and verify line pressure before we condemn it. A bad valve is one of the most common no-ice causes on these units.
- Frozen fill tube. Water dribbles into the back of the mold through a small plastic fill tube. If the valve weeps, or the mold runs too cold, that last bit of water freezes in the tube and caps it off. Next cycle the water has nowhere to go, so it backs up or spills, and ice production stops. The tell is a small ice plug right where the tube meets the mold. We thaw the tube, find why it froze, and fix the root cause, usually a weeping valve, so it does not come right back.
Full causes and diagnostic steps: Sub-Zero Ice Maker Not Working.
Serving Redwood City
Redwood City: response and coverage.
Our San Mateo based Peninsula technician covers Redwood City regularly, from the Redwood Shores condos to the Emerald Hills estates. As the county seat, it is one of the larger cities on the route, so the housing mix is wide.
Neighborhoods we cover regularly in Redwood City: Emerald Hills, Redwood Shores, Woodside Plaza. Beyond those, our service area in Redwood City covers the city limits.
Redwood City is San Mateo County's seat, with three ZIPs covering a wide stretch: the downtown theatre district and older neighborhoods in 94061 and 94063, and the waterfront offices and condos of Redwood Shores in 94065. Emerald Hills adds a hillside pocket of larger homes on the west side. Across all of it, the appliances are everyday brands: GE, Whirlpool, Samsung, and LG fridges, ranges, and laundry.
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Typical
Repair pricing is provided in a written estimate after the $99 on-site diagnosis, which is credited toward the repair.
-
Warranty
You get a parts and labor warranty in writing before we start: from 3 months to 2 years depending on the type of repair. Standard repairs carry 3 months on parts and labor, inverter boards 1 year, and a full sealed-system rebuild 2 years. We put the part, the price, and the labor on the quote before we touch the machine, so you know exactly what is covered.
Related
More on Sub-Zero and Redwood City.
Nearby cities
Sub-Zero ice maker not working near Redwood City.
Also in Redwood City
Other ice maker repairs we do in Redwood City.
Ready to book the Redwood City call?