LG DRYER · UNION CITY
LG dryer not heating in Union City? We fix it.
An LG dryer that tumbles but runs the load out cold is one of the most common laundry calls we take. The failure list on these is short and predictable, and we work it in a set order so we are not guessing.
We handle LG dryer not heating repairs across Union City, from Alvarado, Decoto, Mission Hills to the surrounding neighborhoods.
We cover Union City from our San Ramon base (South Bay). Here is the short version; the full guide is on the LG Dryer Not Heating page.
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
Why this happens
What we look for first.
- Blown thermal fuse (DLE series). LG electric dryers carry a thermal fuse on the heater housing that opens for good once it trips. When it blows the dryer still tumbles and the timer counts down, but no heat ever comes on. Nine times out of ten the fuse blew because the vent was clogged and the unit overheated, so we never just swap the fuse and walk. We replace the fuse and clear the restriction, or it blows again in a week.
- Open heating element assembly. The heating element is a coil inside a metal can at the back of the cabinet. The coil sags, touches the housing, and either grounds out or breaks open. A broken coil reads infinite resistance on the meter and gives you a stone-cold load. We test the element terminal to terminal, and if it is open we replace the full assembly, not a patched coil.
Full causes and diagnostic steps: LG Dryer Not Heating.
Serving Union City
Union City: response and coverage.
Union City is a 25 to 30 minute run down 680. We schedule it with the Fremont and Newark leg, so it runs on planned South Bay days, usually same-week.
Neighborhoods we cover regularly in Union City: Alvarado, Decoto, Mission Hills. Beyond those, our service area in Union City covers the city limits.
Union City is mid-century and 1980s tract housing through Alvarado, Decoto, and the Union Landing side, running GE, LG, Samsung, Whirlpool, and Maytag. The Mission Hills neighborhood above 880 is newer and pricier, adding Bosch and KitchenAid built-in.
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Typical
Repair pricing is provided in a written estimate after the $99 on-site diagnosis, which is credited toward the repair.
-
Warranty
You get a parts and labor warranty in writing before we start: from 3 months to 2 years depending on the type of repair. Standard repairs carry 3 months on parts and labor, inverter boards 1 year, and a full sealed-system rebuild 2 years. We put the part, the price, and the labor on the quote before we touch the machine, so you know exactly what is covered.
Before you call
Is your washer or dryer worth repairing?
Repair price depends on the fault and access, especially on stacked units. If the machine cost under $1,000 new, the repair math may not work. We diagnose the machine on site and provide the written repair estimate before any work starts.
Under $1,000 new, repair may not be the right investment. Premium, stacked, and commercial-grade machines are stronger repair candidates, and we will give you a straight recommendation after diagnosis.
Worth checking yourself first: clear the lint trap and the vent path, make sure the load is not overloaded or sitting unbalanced, and look for a kink or clog in the drain hose. If the machine truly is done, put that money toward the replacement. And since we also run an HVAC side of the business, a free assessment visit comes with any furnace, A/C, or heat pump replacement.
Related
More on LG and Union City.
Also in Union City
Other dryer repairs we do in Union City.
Ready to book the Union City call?