MAYTAG DRYER · SAN BRUNO

Maytag dryer not heating in San Bruno? We fix it.

Maytag dryers that tumble fine but dry cold are one of our bread-and-butter calls. These are Whirlpool-built machines, so the no-heat failures follow a tight pattern and we know where to look first.

We handle Maytag dryer not heating repairs across San Bruno, from Mills Park, Crestmoor, Rollingwood to the surrounding neighborhoods.

We cover San Bruno with our San Mateo County technician (Mid-Peninsula). Here is the short version; the full guide is on the Maytag Dryer Not Heating page.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Why this happens

What we look for first.

Blown thermal fuse. This is the most common no-heat cause on Maytag Bravos and Centennial units. The thermal fuse sits on the blower housing or near the heating element and is a one-time safety device. When the dryer overheats, usually from a clogged vent, the fuse opens and kills the heat circuit. The drum still turns because the motor runs on a separate path. We test it with a meter, replace it, and then find out WHY it blew so it does not happen again next month.
Burned-out heating element (electric models). The coil element on electric Bravos and Centennial dryers sags and shorts to the metal housing or just breaks open with age. A broken coil reads open on the meter and gives you zero heat. A shorted coil can throw a breaker or heat constantly. We pull the element, ohm it out, and check for sag against the housing before deciding to swap it.

Full causes and diagnostic steps: Maytag Dryer Not Heating.

Serving San Bruno

San Bruno: response and coverage.

San Bruno sits close to our San Mateo base and is regular territory for us near SFO. No same-day guarantee, but the short distance means it schedules easily most weeks.

Neighborhoods we cover regularly in San Bruno: Mills Park, Crestmoor, Rollingwood. Beyond those, our service area in San Bruno covers the city limits.

San Bruno is one ZIP, 94066, tract homes from the 1940s through the 1960s climbing the hills in Rollingwood, Crestmoor, and Portola Highlands, most on original or first-replacement kitchens. Everyday brands: GE, Whirlpool, Samsung, LG, and Maytag.

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Typical

Repair pricing is provided in a written estimate after the $99 on-site diagnosis, which is credited toward the repair.
Warranty

You get a parts and labor warranty in writing before we start: from 3 months to 2 years depending on the type of repair. Standard repairs carry 3 months on parts and labor, inverter boards 1 year, and a full sealed-system rebuild 2 years. We put the part, the price, and the labor on the quote before we touch the machine, so you know exactly what is covered.

Before you call

Is your washer or dryer worth repairing?

Repair price depends on the fault and access, especially on stacked units. If the machine cost under $1,000 new, the repair math may not work. We diagnose the machine on site and provide the written repair estimate before any work starts.

Under $1,000 new, repair may not be the right investment. Premium, stacked, and commercial-grade machines are stronger repair candidates, and we will give you a straight recommendation after diagnosis.

Worth checking yourself first: clear the lint trap and the vent path, make sure the load is not overloaded or sitting unbalanced, and look for a kink or clog in the drain hose. If the machine truly is done, put that money toward the replacement. And since we also run an HVAC side of the business, a free assessment visit comes with any furnace, A/C, or heat pump replacement.

Nearby cities

Maytag dryer not heating near San Bruno.

Also in San Bruno

Other dryer repairs we do in San Bruno.

Ready to book the San Bruno call?

Tell us the model and the symptom. We will quote it.