How fast can you get to Albany for a Thermador call?

Albany runs on our Inner East Bay day with Berkeley and Richmond, about 40 to 45 minutes from San Ramon via I-580 or Highway 24 to I-80. Booked windows get a written arrival time before we leave the shop.

My Thermador cooktop clicks on every burner. Is the whole thing bad?

Almost never the whole unit. On these larger Albany kitchens, a cooktop clicking across every burner usually traces back to one bad spark module or a single shorted electrode. We bench-test each electrode and swap only the part that's actually bad.

What does a Thermador repair cost?

Diagnostic is $99 and gets credited toward the repair. Ignition and hinge repair work on these Pro range setups run modest, and we put the price in writing before starting.

THERMADOR · ALBANY

Service · All Thermador Models

Thermador Cooking Appliance Repair · Albany, CA

Thermador range and oven repair for Albany's larger homes and kitchen expansions.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Thermador in Albany

Thermador in Albany kitchens.

Albany's small 1920s to 1940s bungalows on the Marin Avenue grid mostly run compact 24 to 30 inch mainstream ranges, kitchens too tight to fit a full Thermador Pro range. Most of those installs have a decade or two on them by now, which is when the Star Burner ignition and the Pro Grand oven controls start acting up. UC Village and the smaller ADU kitchens across town almost never run Thermador.

Star Burner ignition trouble is the most common reason we get called out on an Albany Thermador. A single burner refusing to light, or the whole cooktop clicking away every time just one burner gets lit, usually comes down to a bad spark module, a worn ignitor electrode, or carbon buildup on an electrode tip that mimics a dead module. Cleaning and re-gapping the electrode, then bench-testing, comes before we ever price a part. The other repeat call in these larger Albany kitchens is a Pro Grand oven that still heats but has drifted off its set temperature after years of service.

What the work looks like

A built-in sealed-system leak repair.

Nitrogen pressure and a soap-bubble test on a built-in fridge line set. We map every leak source before we braze.

The corroded copper up close. After fifteen-plus years this is why a real fix rebuilds the sealed run, so you do not pay the labor twice.

ADRIUM technician brazing a copper refrigerant line onto a compressor with a torch during a sealed-system repair — Brazing a new line onto the compressor during the same kind of sealed-system repair. Recover, braze, evacuate, and recharge: the real fix, done as one complete job.

What the work looks like

A gas oven burner lighting clean after service.

A gas oven bake burner lighting with an even blue flame after service. The white bar is the glow-bar igniter, and when it weakens the oven will not heat even though it still glows.

Common repairs we do

What we close on the truck.

Star Burner ignition fault. Spark module, ignitor electrode, or a fouled valve switch on a Pro range in one of Albany's larger kitchens. We clean and re-gap the electrode first. Carbon at the tip fakes a dead module.
Pro Grand / Pro Harmony oven won't hold temp. Thermocouple and thermostat wear after years of use in a well-used Albany Hill kitchen. On the dual-fuel setups, that's often traced to the fan-circuit relay on the control board instead.
Wall oven door hinge and gasket. Door sag and seal leak, a common pairing with the Pro range installs we see in town. Hinge cartridge swap, gasket replacement.
Freedom column ice-maker assembly. On the T18 and T24 columns that go in beside a Pro range here, the mold cracks and the harvest cycle hangs. The fix is replacing the entire ice-maker assembly, motor and all.

Models we service

Thermador product lines.

Pro Grand and Pro Harmony ranges
Star Burner cooktops
Freedom collection refrigeration
Wall ovens
Sapphire dishwashers
Masterpiece ventilation

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Thermador jobs we have closed.

Dublin, CA · Oven

Thermador Oven Overheating and Throwing a Code · Dublin

A Thermador wall oven in Dublin was overheating on longer bakes and showing an error, with a noisy fan on startup.
Read case →

See all case studies →

Nearby cities

Thermador service in neighboring cities.

More cities

Thermador across our service area.

FAQ

Thermador in Albany questions, answered.

How fast can you get to Albany for a Thermador call?

Albany runs on our Inner East Bay day with Berkeley and Richmond, about 40 to 45 minutes from San Ramon via I-580 or Highway 24 to I-80. Booked windows get a written arrival time before we leave the shop.
My Thermador cooktop clicks on every burner. Is the whole thing bad?

Almost never the whole unit. On these larger Albany kitchens, a cooktop clicking across every burner usually traces back to one bad spark module or a single shorted electrode. We bench-test each electrode and swap only the part that's actually bad.
What does a Thermador repair cost?

Diagnostic is $99 and gets credited toward the repair. Ignition and hinge repair work on these Pro range setups run modest, and we put the price in writing before starting.

Need Thermador service in Albany?

Tell us what is broken. We will quote it.