How fast can you reach Burlingame for a Thermador call?

Our technician lives and works the Peninsula, in San Mateo County, so Burlingame is regular territory, not a trip in from San Ramon. I will not promise same day on every call, but we route it with Millbrae, Hillsborough, and San Mateo often.

Do you stock Thermador parts for Burlingame calls?

Star Burner spark modules, ignitors, Freedom column ice-maker assemblies, and wall-oven hinge cartridges ride on the truck. Anything specific to an older model, BSH distribution ships it in about three business days.

What does a Thermador repair cost in Burlingame?

Diagnostic is $99, credited toward the repair. I write the repair quote after I see the unit and confirm the part, so the number you get is accurate, not a phone guess. Gas burner work goes out under CSLB #1136642.

THERMADOR · BURLINGAME

Service · All Thermador Models

Thermador Pro-Kitchen Repair · Burlingame, CA

Thermador range, Freedom column, and wall-oven repair for Burlingame, from the Avenue to the flats near the Bay.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Thermador in Burlingame

Thermador in Burlingame kitchens.

Burlingame Avenue draws the retail traffic, but our Thermador calls come from the flats and side streets, older homes with a kitchen that got upgraded at some point with a Pro Harmony range or a Freedom column. The Freedom column ice-maker assembly is the repeat call here, the same failure I see in Hillsborough next door, where the harvest motor wears out around the same time as the ice mold and I replace the whole assembly instead of just the part that looks broken.

Star Burner ignition trouble is the other common one, a burner that clicks but will not light, or lights on one side and skips the rest. ZIP 94010. Our technician is based on the Peninsula, in San Mateo County, and runs Burlingame with Millbrae, Hillsborough, and San Mateo on the same route.

What the work looks like

A built-in sealed-system leak repair.

Nitrogen pressure and a soap-bubble test on a built-in fridge line set. We map every leak source before we braze.

The corroded copper up close. After fifteen-plus years this is why a real fix rebuilds the sealed run, so you do not pay the labor twice.

ADRIUM technician brazing a copper refrigerant line onto a compressor with a torch during a sealed-system repair — Brazing a new line onto the compressor during the same kind of sealed-system repair. Recover, braze, evacuate, and recharge: the real fix, done as one complete job.

What the work looks like

A gas oven burner lighting clean after service.

A gas oven bake burner lighting with an even blue flame after service. The white bar is the glow-bar igniter, and when it weakens the oven will not heat even though it still glows.

Common repairs we do

What we close on the truck.

Star Burner ignition repair. Click with no flame, or one burner lighting while the others stay cold. Spark module, ignitor electrode, gas valve micro-switch, in that order.
Pro Grand / Pro Harmony control-board relay. Convection fan runs on after the cycle ends. Fan-circuit relay on the control board, confirmed on the bench.
Freedom column T18/T24 ice-maker assembly. Full assembly replacement, since the harvest motor wears at the same rate as the mold.
Wall oven door hinge and gasket. Door sag and seal leak in these Avenue-adjacent remodels. Hinge cartridge swap, gasket replacement, about two hours.

Models we service

Thermador product lines.

Pro Grand and Pro Harmony ranges
Star Burner cooktops
Freedom collection refrigeration
Wall ovens
Sapphire dishwashers
Masterpiece ventilation

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Thermador jobs we have closed.

Dublin, CA · Oven

Thermador Oven Overheating and Throwing a Code · Dublin

A Thermador wall oven in Dublin was overheating on longer bakes and showing an error, with a noisy fan on startup.
Read case →

See all case studies →

Nearby cities

Thermador service in neighboring cities.

More cities

Thermador across our service area.

FAQ

Thermador in Burlingame questions, answered.

How fast can you reach Burlingame for a Thermador call?

Our technician lives and works the Peninsula, in San Mateo County, so Burlingame is regular territory, not a trip in from San Ramon. I will not promise same day on every call, but we route it with Millbrae, Hillsborough, and San Mateo often.
Do you stock Thermador parts for Burlingame calls?

Star Burner spark modules, ignitors, Freedom column ice-maker assemblies, and wall-oven hinge cartridges ride on the truck. Anything specific to an older model, BSH distribution ships it in about three business days.
What does a Thermador repair cost in Burlingame?

Diagnostic is $99, credited toward the repair. I write the repair quote after I see the unit and confirm the part, so the number you get is accurate, not a phone guess. Gas burner work goes out under CSLB #1136642.

Need Thermador service in Burlingame?

Tell us what is broken. We will quote it.