MAYTAG · SOUTH SAN FRANCISCO
Service · All Maytag ModelsMaytag Appliance Repair · South San Francisco, CA
Maytag laundry, fridge, and range repair across South San Francisco, from Sign Hill to the flats near El Camino.
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
Maytag in South San Francisco
Maytag in South San Francisco kitchens.
The hillside sign spells out The Industrial City, and the residential streets below it, Sign Hill, Winston Manor, Sunshine Gardens, still run a lot of the practical, mid-market appliances that came with that working history. Bravos washers and Centennial dryers are common in the garages here, usually paired with an electric range in kitchens that have not been touched since the 1970s or 80s.
East of 101 is biotech campuses and office parks, not kitchens, so almost every call we take is on the residential west side. The range work stands out in this city more than the laundry does. An electric oven that will not heat is usually the bake element, but I test it with a meter before I say so, because a weak element and a bad control board can look the same to someone just watching the dial.
Water and ice systems
The water inlet valve, a common fridge leak.
What the work looks like
A dishwasher leaking from the pump and sump.
Common repairs we do
What we close on the truck.
- Bravos gearbox and basket spider. Spin howls and the washer walks. Gearbox and spider go together, and I lay out the repair cost against a new machine before ordering.
- Bravos lid-lock switch. Click, no wash start. We usually stock the common repair parts, and we confirm timing after the on-site diagnosis.
- Centennial dryer glide, belt, and idler kit. Drum drags and the motor gets blamed for wear that is actually in the glides and belt.
- MER electric range bake element. Oven runs cold or will not heat at all. I check the element with a meter first, since a bad element reads open and a weak one does not.
Models we service
Maytag product lines.
- Bravos top-load washers
- Centennial dryers
- Top-freezer refrigerators (MRT, MFI)
- Freestanding ranges (MGR, MER)
- Built-in dishwashers
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Written
3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Nearby cities
Maytag service in neighboring cities.
More cities
Maytag across our service area.
- Maytag in Alameda
- Maytag in Berkeley
- Maytag in Castro Valley
- Maytag in Concord
- Maytag in Cupertino
- Maytag in Danville
- Maytag in Dublin
- Maytag in Fremont
- Maytag in Hayward
- Maytag in Lafayette
- Maytag in Livermore
- Maytag in Los Altos
- Maytag in Los Gatos
- Maytag in Martinez
- Maytag in Menlo Park
- Maytag in Milpitas
- Maytag in Mountain View
- Maytag in Newark
- Maytag in Oakland
- Maytag in Palo Alto
- Maytag in Pleasant Hill
- Maytag in Pleasanton
- Maytag in Richmond
- Maytag in San Jose
- Maytag in San Leandro
- Maytag in San Ramon
- Maytag in Santa Clara
- Maytag in Sunnyvale
- Maytag in Union City
- Maytag in Walnut Creek
- Maytag in Alamo
- Maytag in Atherton
- Maytag in Blackhawk
- Maytag in Hillsborough
- Maytag in Los Altos Hills
- Maytag in Moraga
- Maytag in Orinda
- Maytag in Piedmont
- Maytag in Saratoga
- Maytag in Albany
- Maytag in El Cerrito
- Maytag in Woodside
- Maytag in Portola Valley
- Maytag in Pacifica
- Maytag in San Mateo
- Maytag in Foster City
- Maytag in Belmont
- Maytag in San Carlos
- Maytag in Redwood City
- Maytag in East Palo Alto
- Maytag in Half Moon Bay
- Maytag in Burlingame
FAQ
Maytag in South San Francisco questions, answered.
-
How far out is South San Francisco from your Peninsula technician?
Not far. He is based in San Mateo, and South San Francisco sits on his regular route north of there with San Bruno and Daly City. -
What is the diagnostic fee?
$99, credited toward the repair. Everything gets written up before we start. -
My oven never really gets hot even though the dial says it should. Is that always the element?
Usually. The bake element is the first thing I test, and a failed one is often visibly warped or arced. If it reads fine on the meter, I check the oven temperature sensor next before I write up a control board.
Need Maytag service in South San Francisco?