GE · DANVILLE
Service · All GE ModelsGE Appliance Repair · Danville, CA
GE Profile, Cafe, Adora, and Monogram appliance repair for Danville homes.
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
GE in Danville
GE in Danville kitchens.
Danville GE work covers the Sycamore, Westside, and Old Blackhawk-adjacent neighborhoods where Profile and Cafe series refrigerators, ranges, dishwashers, and laundry sets are the regular call list. The 94506 and 94526 housing stock runs a wide mix from 1990s tract builds to recent infill, so the GE call pattern is everything from the Profile icemaker swap to the Monogram built-in column dispenser-board issue.
We provide a written repair estimate after the on-site diagnosis and before any work starts. Cafe range RTD sensor failures show up as the F2 over-temp fault and the swap is quick. Drive time from San Ramon is 10 minutes. Same or next-day work is the norm here.
Water and ice systems
The water inlet valve, a common fridge leak.
Common repairs we do
What we close on the truck.
- Profile and Adora icemaker assembly. No ice, fresh-food warm. We provide a written repair estimate after the on-site diagnosis and before any work starts.
- Cafe range oven temp sensor (RTD) F2 fault. Oven trips an F2 over-temp code. Sensor swap, recalibrate.
- Profile dishwasher recirc-pump seal and LE error. Pump leak hits the float switch. Pump and base-pan dry, clear code.
- Front-load washer drain pump and F45 unbalance. Impeller cracks or board solder joint fails. Re-flow or swap.
Models we service
GE product lines.
- Monogram luxury built-ins
- Cafe Series with brass accents
- Profile mid-tier
- Adora entry
- Energy Star certified lines
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Written
3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Recent work
GE jobs we have closed.
-
GE French Door Refrigerator Freezer Icing Up and Ice Maker Over-Icing
A GE french door refrigerator in Millbrae was icing up from the inside: the ice maker was freezing over, frost had spread across the back wall of the freezer and the air vent housing, and ice was building up on the freezer drawer rails.
Read case → -
GE Monogram Built-in Fridge Not Cooling: Sealed-System Rebuild, San Ramon
A San Ramon GE Monogram built-in fridge had stopped cooling. Both compartments warming, the unit running non-stop, ice building up, and a loud compressor.
Read case → -
GE Monogram Double Oven Shutting Down: Cooling Fan Motor
A Walnut Creek GE Monogram double oven kept overheating and shutting itself off, with a cooling-related error on the panel.
Read case →
Nearby cities
GE service in neighboring cities.
More cities
GE across our service area.
- GE in Alameda
- GE in Berkeley
- GE in Castro Valley
- GE in Concord
- GE in Cupertino
- GE in Dublin
- GE in Fremont
- GE in Hayward
- GE in Lafayette
- GE in Livermore
- GE in Los Altos
- GE in Los Gatos
- GE in Martinez
- GE in Menlo Park
- GE in Milpitas
- GE in Mountain View
- GE in Newark
- GE in Oakland
- GE in Orinda
- GE in Palo Alto
- GE in Pleasant Hill
- GE in Pleasanton
- GE in Richmond
- GE in San Jose
- GE in San Leandro
- GE in Santa Clara
- GE in Sunnyvale
- GE in Union City
- GE in Walnut Creek
- GE in Atherton
- GE in Hillsborough
- GE in Los Altos Hills
- GE in Moraga
- GE in Piedmont
- GE in Saratoga
- GE in Albany
- GE in El Cerrito
- GE in Woodside
- GE in Portola Valley
- GE in Daly City
- GE in South San Francisco
- GE in San Bruno
- GE in Pacifica
- GE in San Mateo
- GE in Foster City
- GE in Belmont
- GE in San Carlos
- GE in Redwood City
- GE in East Palo Alto
- GE in Half Moon Bay
- GE in Millbrae
- GE in Burlingame
FAQ
GE in Danville questions, answered.
-
How quickly can you reach Danville for a GE service call?
Drive time from San Ramon is 10 minutes. Same or next-day work is the norm here when we have a window. Profile and Cafe parts we carry on the truck so most calls involve parts we usually stock. -
Do you carry common GE parts for the typical units in Danville?
We carry Profile icemakers, defrost-cycle heaters, Cafe RTD sensors, Profile dishwasher recirc pumps, and front-load drain pumps. Monogram parts we source per job because the lead time on door gaskets and built-in components runs about two weeks. -
What is the typical cost for a GE icemaker, RTD sensor, or dishwasher pump call in Danville?
Diagnostic is $99, credited toward the repair. We provide a written repair estimate after the on-site diagnosis and before any work starts.
Need GE service in Danville?